详情

JW-B-C1

标准衣架式流道设计，. 上模唇采用推拉式或推出式微调，下模唇▲可换，调节范围最大达5mm,适用生产PC、PMMA、GPPS、PET.等单层或多层高透明片材或板材。,

Standard coat-hanger design, the upper die lip adjusting adopts the push- pull type or push- out fine- tuning type,thelower die lip can exchange, the maximum adjusting range up to 5 mm, it is suitable for the production of PC, PMMA,GPPS, PET, single-layer or multi-layer high transparent sheet or plate

JW-B- A2

重型♀模头采用标准衣架式流道设计，上模唇可调、下模唇可换及45度调节阻流棒调节装置,能够满足不同厚度制品的需求。适用生产宽度在2000mm以下,厚度3-30mm的ABS、PE、PP厚板。

With special coat-hanger channel design, adjustable upper die lip, changeable lower die lip and 45° blocking bar, thedie adapt to ABS, PE, PP thick plate with the width below 2000mm and thickness between 3- -30mm.

询价

• 上一个：片材模头系列

• 下一个：多层共挤※分配器